ASBESTOS AWARENESS - Covers how to work safely around asbestos. Click for long description.
Fee: $75.00
Class Dates: (click a date to register)
Class Time: 8 AM - 12 PM
Table Of Contents
BLOODBORNE PATHOGENS - Discusses requirements of 29 CFR 1910.1030 pertaining to a general explanation of epidemiology symptoms of Bloodborne diseases, modes of transmission, explanation of an exposure control plan, methods for recognizing tasks and activities that may involve exposure to blood and other potentially infectious materials and disposal of PPE.
Fee: $95.00
Dates: (click a date to register)
Time: 1 PM - 5 PM
Table Of Contents
CONFINED SPACE - Designed to provide students instruction on safety procedures and requirements of confined spaces and Permit Required Confined Spaces. Click for long description.
Fee: $95.00
Class Dates: (click a date to register)
Class Time: 8 AM - 12 PM
Table Of Contents
CONTINGENCY PLANNING - For personnel who are required to write their Company's Emergency Plans to include disasters and WMD. IAW CFR 29 & 40.
Fee: $95.00
Dates: (click a date to register)
Time: 1 PM - 5 PM
Table Of Contents
DISASTER WORKER 16 HOURS - Training for employees who may respond to hazardous substances and conditions at disaster locations to include WMD and how to work safely under disaster situations.
Fee: $250.00
Dates: (click a date to register)
Time: 8 AM - 5 PM
Duration: Two 8 hour days.
Table Of Contents
SAFETY MANAGER - Provides general safety training to company Safety Managers / Facility Managers on implementing and maintaining a company's Safety Program using 29 CFR. Click for long description.
Fee: $125.00
Class Dates: (click a date to register)
Class Time: 8 AM - 5 PM
Table Of Contents
EM 385.
Fee: $300.00
Class Dates: (click a date to register)
Class Time: 7 AM - 4:30 PM
Table Of Contents
EXCAVATION / TRENCHING SAFETY - Safe excavation and trenching practices. Click for long description.
Fee: $95.00
Class Dates: (click a date to register)
Class Time: 1 PM - 5 PM
Table Of Contents
EXPLOSIVES SAFETY FOR DOD COMPLIANCE (50 HOURS) - Compliance training based on the DoD 4145.26M Contractor's Safety Manual for Ammunition and Explosives; DoD 6055.9 STD DoD Ammunition and Explosives Safety Standards; US Air Force Manual 91-201, Air Force Explosives Safety Standards and US Army Pamphlet 385-64 Army Explosvies Safety Standards. Aimded at, but not limited to DoD contractor personnel. This level of training is far more thorough and in-depth than what either OSHA or Colorado require. Very thorough training in the areas of: storage/shipping compatibility; storage; electrical safety; hazards and hazard classification; protective measures; housekeeping; safe practices; Quantity-Distance; and fire protection. Click for long description.
Fee: $1450.00
Dates: (click a date to register)
Time: 7 AM - 6 PM
Duration: Five consecutive ten hour days.
Table Of Contents
EXPLOSIVES SAFETY FOR OSHA COMPLIANCE (20 HOURS) - This class covers the fundamentals of explosives safety for OSHA compliance. The areas covered are OSHA compliance, BATF compliance, and State of Colorado compliance. Click for long description.
Fee: $425.00
Dates: (click a date to register)
Time: 7 AM - 6 PM
Duration: Two consecutive ten hour days.
Table Of Contents
FALL PROTECTION (Construction) - Covers requirements as outlined in 29 CFR 1926.500 - 503. Click for long description.
Fee: $95.00
Class Dates: (click a date to register)
Class Time: 8 AM - 12 PM
Table Of Contents
FORK LIFT DRIVERS SAFETY TRAINING Click for long description.
Fee: TBD
Dates: By Request
Time: By Request
Duration: TBD
Table Of Contents
NOTE: Fork Lift Drivers Safety Training is an onsite training class taught on your Forklift and at your location.
OSHA 10 Hour General Industry - training providing instruction on a variety of general industry safety topics in accordance with 29 CFR 1910. The 10 hour training is geared to entry level participants. Click for long description.
Fee: $145.00
Dates: (click a date to register)
Time: 7 AM - 6 PM
Duration: 10 Hours.
Table Of Contents
OSHA 30 Hour General Industry - training provides in-depth instruction on a variety of general industry safety topics in accordance with 29 CFR 1910. The 30 hour training is geared towards Supervisory level participants, or any personnel responsible for their company's safety and health program. Click for long description.
Fee: $495.00
Dates: (click a date to register)
Time: 7 AM - 4:30 PM
Duration: 4 Days.
Table Of Contents
H2S GAS SAFETY (4 HOURS) - designed to familiarize students on the dangers, warning methods and procedures when working around potential H2S gas hazards.
Fee: $95.00
Dates: (click a date to register)
Time: 1 PM - 5 PM
Duration: 4 Hours.
Table Of Contents
HAZARD COMMUNICATION - Designed to give students working knowledge of how to identify chemical hazards and how to comply with the requirements of 29 CFR 1910.1200. Click for long description.
Fee: $95.00
Dates: (click a date to register)
HAZARD COMMUNICATION FOR METH LAB REMEDIATION CREWS - Designed to give students working knowledge of how to identify chemical hazards and how to comply with the requirements of 29 CFR 1910.1200
Fee: $145.00
Dates: (click a date to register)
Hazardous Materials Management. Click for long description. -->
Fee: $350.00
Class Dates: (click a date to register)
Class Time: 8 AM - 5 PM
Table Of Contents
HAZWOPER INITIAL (40 Hours) - Designed to provide students knowledge of hazardous waste operations and emergency response. Covers requirements of 29 CFR 1910.120.
Fee: $500.00
Class Dates: (click a date to register)
Class Time: 8 AM - 5 PM
Duration: Five consecutive 8 Hour days.
Table Of Contents
HAZWOPER REFRESHER (8 Hours) - Designed to increase and refresh student knowledge of hazardous waste operations and emergency response. Covers requirements of 29 CFR 1910.120. Proof of 40 hr. HAZWOPER Initial completion required.
Fee: $125.00
Class Dates: (click a date to register)
Class Time: 8 AM - 5 PM
Table Of Contents
HAZWOPER 24 Hour - Training for the occasional waste site worker who has little or no chance of exposure to the wastes or hazardous substances involved. Course takes place over the first 3 days of the HAZWOPER 40 Hour class. Does not include Hands on Exercise.
Fee: $300.00
Class Dates: (click a date to register)
Class Time: 8 AM - 5 PM
Table Of Contents
LOCKOUT / TAGOUT - Covers requirements for the control of hazardous energy as required in 29 CFR.
Fee: $95.00
Class Dates: (click a date to register)
Class Time: 1 PM - 5 PM
Table Of Contents
METH LAB REMEDIATION MANAGEMENT - Course designed to increase specifics on liability issues, applicable state and local regulations, sampling methods hazards, toxicity, remediation methods, site specific safety plans and procedures.
Fee: $225.00.
Class Dates: (click a date to register)
Class Time: 8 AM - 4 PM
Table Of Contents
NFPA 70E/ARC FLASH - follow and utilize the requirements of the National Electrical Codes and NFPA 70E.
Fee: $175.00
Class Dates: (click a date to register - or call 303-360-9801 to schedule on-site instruction)
Class Time: 8 AM - 5 PM
Table Of Contents
OIL & GAS 24 HOURS - Safety training provides Hazard Identification instruction on a variety of topics. Course consists of 10 hours on construction, 10 hours on general industry and 4 hours of H2S gas hazards. This course is geared toward both supervisory or entry level participants within the Oil & Gas Industry or those individuals temporarily working at refineries or just occasionally on-site in support of this expanding industry. A must, for any foreman, supervisor or those responsible for their company's safety and health program. Four separate certificates will be awarded upon successful completion of this course.
Fee: $525.00
Dates: (click a date to register)
Time: 8 AM - 5 PM
Duration: Three consecutive 8 hour days.
Table Of Contents
OSHA 10 Hour Construction - Safety training provides instruction on a variety of construction and industry topics geared to entry level participants. Click for long description.
Fee: $145.00
Class Dates: (click a date to register)
Class Time: 7 AM - 4:30 PM; 7 AM - 12:00 PM
Duration: One full day, one half day.
Table Of Contents
OSHA 30 Hour Construction - Safety training provides instruction on a variety of construction and industry topics, geared toward Supervisory level participants. A must for any foreman, superintendent, or those responsible for their company's safety and health program. Click for long description.
Fee: $495.00
Class Dates: (click a date to register)
Class Time: 7 AM - 4:30 PM
Duration: Four Consecutive Days.
Table Of Contents
RESPIRATOR TRAINING / FIT TESTING - Covers selection, use, and maintenance of respirators as outlined in 29 CFR 1910.134. Qualitative Fit Testing. Bring your respirator and instruction manual.
Fee: $75.00
Dates: (click a date to register)
DOT SAFE SHIPPING OF HAZMAT - Safe shipping of hazardous materials for small quantity transporters. Covers general safety, awareness, labeling, and manifesting requirements to assist shippers and drivers on how to comply with DOT hazardous materials regulations, IAW 49 CFR 100-185.
Fee: $300.00
Class Dates: (click a date to register)
Class Time: 8 AM - 5 PM
Duration: Two consecutive 8 hour days.
Table Of Contents
SARA TITLE III COMPLIANCE - How to prepare a Hazardous Materials Management Plan (HMMP) in accordance with your local Fire Dept. and the EPA. (Your MSDS's & Floor Plans preferred)
Fee: $95.00
Dates: (click a date to register)
Time: 8 AM - 12 PM
Table Of Contents
SCAFFOLDING SAFETY - Safe scaffolding practices.
Fee: $95.00
Class Dates: (click a date to register)
Class Time: 1 PM - 5 PM.
Table Of Contents
SEXUAL HARASSMENT - What it is and how to prevent it in the workplace. First three hours taught on Equal Opportunity Treatment (EOT) subjects, the fourth hour includes question and answer session with Kristen J. Berg, Attorney At Law.
Fee: $125.00
Dates: (click a date to register)
SPILL RESPONSE - Spill Response Training.
Fee: TBD
Class Dates: (click a date to register)
Class Time: 8 AM - 12 PM or 1 PM - 5 PM.
Table Of Contents
UNEXPLODED ORDNANCE AWARENESS (4 HOURS) - Training meant to provide a level of awareness and recognition of possible ordnance and explosive hazards for non-ordnance technicians who are working at remediation sites where such items might be encountered. Scheduled by request for a minimum of 4 students. Click for long description.
Fee: $160.00
Dates: (click a date to register)
Time: By Request
Duration: 4 Hours.
Table Of Contents
WMD AWARENESS AND CONTINGENCY PLANNING - Weapons of Mass Destruction awareness recognition, and contingency planning for government and business personnel. The threats, weapons, and concerns about WMD taught by former military Explosive Ordnance Disposal and Disaster Preparedness personnel. Hazard recognition and protective measures, tailored for you. Scheduled by request for a minimum of 3 students. Click for long description.
Fee: $400.00
Dates: (click a date to register)
Time: By Request
Duration: Two consecutive 8 hour days.
Table Of Contents
Prices are based per person. Discount rates available for 3 or more students.
All classes must be paid for prior to class start date. Payment can be made by Purchase Order, Check or Credit Card. Call 303-360-9801 for course availability and registration.
* Contact us for a map and a full menu of other classes we offer.
** Classes can also be taught at your facility.
More information on our Classes can be found on our web site: www.hppsafety.com.
To register for any of these classes, Click Here.
© HP&P Safety Inc.
30 S Havana ST STE 302F
Aurora, CO 80012.
Phone: 303-360-9801
Fax: 303-360-9825
E-mail: HPP@hppsafety.com
Serving Colorado, Wyoming and surrounding areas.